How Do I Connect My DSTV Decoder To Cable?

Can two TVs use one cable box?

Typically, each television in your home needs its own receiver box to view channels; however, if you have televisions in two different rooms in your home but only own one Comcast cable receiver box, you can connect that box to both TVs using a coaxial cable splitter and coaxial cable..

How do I install free TV?

For easy access to your FreeTV Digital signals, follow these short steps:Connect your Set-Top-Box to your Television.Connect your local antenna TV cable to the back of your Set-Top-Box.Connect your Set-Top-Box to power supply and turn it on.More items…

Why does my TV say no signal when HDMI is plugged in?

The No Signal message indicates a problem with the cable connection or the external device. … Disconnect the HDMI cable from the TV and move it to an alternate port. Plug the device back in, and power the device back on. Change the TV to the new HDMI input to see if the issue is resolved.

How can I improve my DSTV signal strength?

How To Fix Signal Strength On DStv?Check F-type connectors. Check for incorrectly connected F-type connectors on the LNB and at the back of the decoder.Correct the LNB alignment. … Adjust satellite dish alignment. … Replace a faulty LNB.Move your satellite dish. … Cut down or prune trees that may obstruct the signal.

Why does the DSTV Explora have a USB port?

The Explora boasts much-improved hardware compared to its predecessors. … There are also USB ports on the back of the Explora to allow for future expansion of the hardware’s capabilities, including the possibility of a 3G or WiFi connection being added.

How do I fix no signal?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.

Can you play USB on DStv decoder?

DStv Care on Twitter: “The USB port behind the DStv decoder comes standard on the decoder and is reserved for future use.

How do I connect two tvs to one DStv decoder?

Re: How to connect two TV sets to a 4U DSTV decoder in different rooms. Wire from the dish goes into decoder as per normal. Connect the tv closest to the decoder via the hdmi / av cables to that tv. Take the out cable at the back of the decoder to the other tv, no splitter needed.

How do you fix a DStv when it says no signal?

See how you can improve your DStv signal strength and quality.Why your DStv says no signal? … Step 1: Check your DStv connection cables. … Step 2: Reboot your decoder. … Step 3: Inspect your DStv satellite dish. … Step 4: Check your LNB. … Step 5: Call the approved DStv installer.

How do I watch different channels with one DStv decoder?

the 1110, 1131, 1132), you can keep your existing single view decoder and link it to the new DStv HD Decoder using XtraView. This will allow you to access two different channels in your home at the same time (you can watch a movie in the lounge, while the kids watch cartoons in their room).

How can I play USB on my TV?

Prepare the Android smartphone and Micro USB cable. Connect the TV and smartphone with the Micro USB cable….Open the TV’s Media Player app.Press the HOME button on the remote control.Select Media.Select Photo, Music or Video.

How do I setup my DStv decoder?

Firstly, connect your DSTV decoder using RCA and NOT RF cable (in order to see the picture while tuning) Press MENU on the DStv remote control. Go to Advanced Options. Go to TV installation.

How do I connect my DStv decoder to my Smart TV?

How to install the new DStv Now app for your smart TVConnect your smart TV to the internet using ethernet cable or Wi-Fi.Go to the App Store on your TV, search for “DStv Now”, and install the app.Once installed, the app will display a code on your TV screen.On a laptop/desktop, go to and sign in.More items…•

How do you set up a free TV decoder?

Free-to-air TV: How do I install a digital decoder?Remove the aerial cable from the back of the TV set and connect it to the socket marked ANT IN on the digital decoder.Connect one end of the video lead to the socket marked TV on the decoder and the other end to the TV.Plug the power leads on your decoder and TV into a wall power socket.More items…

What is a memory stick used for?

Typically, Memory Sticks are used as storage media for a portable device, in a form that can easily be removed for access by a personal computer. For example, Sony digital compact cameras use Memory Stick for storing image files.

How do I connect my decoder to my TV?

2. Install your decoderConnect your decoder to the TV using the Audio and Video (AV) cables provided.Connect the GOtenna to the RF IN plug on the decoder. if you have an HDMI cable, connect it instead.Connect the power supply unit to the decoder before inserting the other end into the plug point.

How do I connect my DStv decoder to my TV and DVD player?

Connect this jack to your mic port on the dvd player and the rca cables to the DSTV. Thus, the DSTV would connect via the yellow RCA to the TV and the RED & WHITE RCA to the MIC input on your DVD player.

Does a splitter weaken the signal?

Any time a TV distribution signal is split, it will encounter insertion loss that will weaken the signals distributed beyond the splitter. … Channel Master TV splitters are designed to equally divide the signals on the input port of the splitter to each of the output ports.

How do I connect two TVs to one dish receiver?

How to Display HD on Two TVs With a Dish ReceiverPlug one of the HDMI cables into the HDMI port on the back of the HD satellite receiver.Connect the other end of the HDMI cable into the “In” port on the HDMI splitter.Plug the two remaining HDMI cables into the HDMI “Out” ports on the other side of the HDMI splitter.

How do I add free channels on DStv HD decoder?

To access you public channels, press the “TV button” on your remote control. The “Bouquet Options” menu will appear. Pressing any of the arrow buttons on your remote, will open the screen with all the available Free to Air channels. Simply select the channel you wish to view and press ok to tune.